A chemical release agent, which reacts with the cement to produce a
smooth finish to concrete,MNC-TL is applied to the inner face of
shuttering, formwork and moulds, before the casting of concrete.
MNC-TL is used to break the bond and allow an easy release between
the cast concrete and the formwork. May also be used to stop the
build-up of concrete on tools, handling equipment and machinery.
MNC-TL is wax-based.
Easy bond breaking.
Easy stripping of forms.
Smooth, stainfree concrete.
Formwork is protected against continuous wetting and drying action.
Can safely be used on all tools etc.
Spray or paint a thin coating of MNC-TL onto the casting surface of
all forming before each pour or cast of concrete. Apply to the
backs and sides of all forming at regular intervals to allow for
easy cleaning. The regular use of MNC-TL on timber forming lowers
maintenance costs and increases the effective life as well as
producing a waterproof coating.
Care must be taken to avoid applying THICK coatings to NEW hardwood
or plywood forming, as this could cause damage to the surface
MNC-TL must not be allowed to come into contact with any
reinforcement as it stops the concrete from bonding to the steel.
MNC-TL causes a dust film to form where it touches the concrete
surface. This film must be brushed away before any other work
contacting the concrete surface is carried out.
MNC-TL is supplied ready for use, no thinning is necessary. Apply
by brush, or spray a thin coating of MUHU. to wooden or steel
shuttering formwork or moulds, before each concrete cast. For
plant, handling equipment and machinery, etc. hose clean and spray
with MNC-TL at the end of work. For hand tools, buckets, etc.
simply soak in the container of MNC-TL and allow to dry.
20sq metres per litre when sprayed with suitable equipment.
MNC-TL is packed in 13.5 kg iron barrel.